Tag Archives: Temnodontosaurus

Prehistoric Marine Tube (CollectA)

CollectA has emerged as one of the most prolific producers of dinosaur figures, with a few other Mesozoic reptiles and some mammals here and there for variety. They’ve developed a reputation for giving some obscure species the plastic treatment, but in general those species been relatively close relatives of the old standards. The prehistoric marine tube, released in the summer of 2017, is a welcome break from that pattern. It consists of twelve different animals from across the Phanerozoic, and from across the animal tree of life.

CollectA Prehistoric Marine Tube

The new CollectA figures are mostly around the same size as the ones from the sadly discontinued Safari Ltd prehistoric sea life Toob from a few years back. The two together give you a nice mix of animals, with no genera repeated. Let’s go through the CollectA figures one by one:

From the Cambrian period comes Olenoides, a common trilobite in the Burgess Shale. This figure is about 4 cm long, not counting appendages, making it around half life size. It resembles Olenoides in having cerci (the appendages at the tail end), but the sculpturing of the cephalon (head) is pretty far off the mark. Still, for CollectA’s first ever arthropod figure, it’s not too bad. Certainly much better than their first dinosaurs.

CollectA mini Olenoides

From the Ordovician period (and persisting into the Silurian), is the gigantic cephalopod Cameroceras, which is more closely related to the modern nautilus than either is to the ammonites in this set. This version is about 7 cm long, or around 1:85 scale. There’s precious little available for Ordovician toys, even though it’s when stereotypically Paleozoic marine faunas were really established. So this is a welcome addition in my book.

CollectA mini Cameroceras

Moving on to the Devonian, we come to everybody’s favorite giant armored fish, Dunkleosteus. This one is 7 cm long, or about 1:100 scale. It’s CollectA’s very first arthrodire, and their very first Devonian animal (are you starting to pick up on a theme?). They did a pretty good job, avoiding the common pitfall of making the sclerotic rings (internal eyeball bones) visible externally. The tail isn’t how I would reconstruct it, but reasonable people can disagree about how something the size of Dunkleosteus swam. The plates are about the right shape, and they look like they have some actual skin on them, which is a welcome change from some very zombie-esque reconstructions.

CollectA mini Dunkleosteus

From the earliest Jurassic, the large ichthyosaur Temnodontosaurus. This figure is about 8 cm long, or roughly 1:110 scale. It’s similar to the standard size version except that it isn’t giving birth. If it didn’t have adult proportions, it could almost stand in as the standard version’s pup. It has the unfortunate ridge of scales around the eyes, although at this small scale it doesn’t look as egregious.

CollectA mini Temnodontosaurus

Pliosaurus is the real giant of the set, at 11 cm long (about 1:110 scale). It differs from its deluxe counterpart in that it lacks the little lampreys hitching a ride on its back. Like the Temnodontosaurus, it doesn’t correct the problems with the larger figure’s head, namely, the odd ridge over the eye and the too-prominent fenestrae.

CollectA mini Pliosaurus

Now Leedsichthys, a gigantic, plankton-eating contemporary of Pliosaurus. Conveniently, they also scale well together: at 9 cm long, this is roughly 1:120 scale, though since it’s mostly known from pieces of the head, length estimates are uncertain. Not only is this CollectA’s first actinopterygian fish (well, this and the Xiphactinus), it’s one of very, very few prehistoric actinopterygian toys ever made. There have probably been fewer than 10, which is pretty bad for a group that has a 400 million year history and includes 95 out of every 100 animals you would think of as a fish. This is a really nice rendition, though necessarily speculative, since much of the skeleton of Leedsichthys was cartilaginous rather than bony and thus fossilized poorly. The one likely flaw I can spot is that it has two pelvic fins and no anal fin. Members of the family it belonged to generally had greatly reduced pelvic fins, and there is no evidence that Leedsichthys had them at all, but it probably did have an anal fin.

CollectA mini Leedsichthys

The Lower Cretaceous saw the rise of the heteromorph ammonites, the ones that evolved un-coiled shell shapes. Hard to know how they swam around looking like this. Australiceras was one of the more conservative of these, and on the smaller side. This little figure is about 1:5. It has 8 arms, though it should probably have 10 (more on that later).

CollectA mini Australiceras

One of the largest ammonites of all time, Parapuzosia is the only “standard” (non-heteromorph) ammonite in the set. A little over 3.5 cm across its longest axis, this figure is about 1:40-1:60 (specimens varied in size). Like the other ammonites in the set, it shows the aptychus (the roughly triangular mineralized structure usually found separated from the shell) as occluding the shell opening, in the manner of a nautilus hood. That arrangement is thought to be incorrect, but it is by far the most common way that aptychi are reconstructed.

CollectA mini Parapuzosia

The huge marine turtle Archelon, known from the Cretaceous Seaway that once covered North America’s central plains, is a nice addition to this set. This figure fairly captures the broad dimensions of the shell, although it might be just a shade too flattened. It’s around 4.5 cm long, making it 1:85 scale. Very cute, and the first turtle from CollectA!

CollectA mini Archelon

At the same time Archelon was swimming around the Cretaceous Seaway, so was the huge ichthyodectid Xiphactinus. At around 7 cm long, it’s roughly 1:85 scale. Xiphactinus is known from plenty of good skeletal material, so it was easier to get right: it has all the right fins in all the right places. The detail on the facial dermal bones and the teeth are pretty decent for a toy this small. One of the gems of the set.

CollectA mini Xiphactinus

Baculites was a heteromorph ammonite from the latest Cretaceous. Its shell was so thoroughly uncoiled that it looked like a straight-shelled cephalopod like the orthocerids of 100 million years earlier. At just over 5 cm long, this is roughly 1:40 scale, so it fits in great alongside some of your big marine reptiles.

CollectA mini Baculites

Another late Cretaceous ammonite, Diplomoceras is commonly compared to a paper clip. The plastic of this toy is flexible enough that you could use it that way! Its shell is just shy of 6 cm measured in a straight line from end to end, so it’s about 1:35-1:40 scale, working well with the Baculites in dioramas. This figure has 10 arms, but some of the other ammonites in this set have 8. No published fossils show the actual anatomy of the soft parts of ammonites, unfortunately, although fossilized traces in mud suggest that they had few arms, like squid, rather than many tentacles, like nautilus. Available evidence suggests that 10 is a likelier number, but it’s peculiar in any event that CollectA made some with 8 and some with 10.

CollectA mini Diplomoceras

Despite minor accuracy issues with some of the figures, this is a fantastic set. Unlike the dinosaur mini tubes that CollectA has released, which have been comprised almost entirely of miniature versions of standard-sized figures, this tube is mostly brand new animals–only the Temnodontosaurus and Pliosaurus are remakes of previous releases. It contains lots of firsts for CollectA: first protostomes (in fact, first invertebrates), first actinopterygians, first turtle, first Paleozoic animals of any description. I would love to see a few of these as large figures, especially Leedsichthys and Xiphactinus (but I have a soft spot for fishes). More importantly, I’d love to see additional tubes like this, full of smaller animals that work well in dioramas with larger figures, or animals that might be hard to market as stand-alone toys. Keep ’em coming, CollectA! For now, you can find these at a variety of online retailers, and outside of North America you might even be able to find them in brick-and-mortar stores.

Temnodontosaurus (Birthing)(CollectA)

Her long, hard months of effort, of endless hunting and feeding, have come to an end. With one final push, the mother expels the baby from her womb and into a world full of danger. But if he can manage to survive and catch his own food, the little swimmer will eventually grow into the top predator of his domain.


At an estimated length of 10-12 metres, Temnodontosaurus was one of the biggest ichthyosaurs and an apex predator of the Early Jurassic seas. Like most of its kin, it fed mainly on ammonites and other cephalopods, but it probably would have included smaller ichthyosaurs and plesiosaurs in its diet. It is therefore a fitting choice for CollectA’s first ever ichthyosaur figure.


As a Standard class toy, this Temnodontosaurus platyodon is not very large, measuring only 18 cm long. Its colour scheme strongly resembles that of the modern grey whale: very dark grey with small silver markings, black eyes, a pink mouth, and white teeth. Perfect coloration for a large marine predator. The long jaws are halfway open and the tail is undulating to the right.


The Temnodontosaurus‘ teeth are small and fine. The upper jaw is slightly warped, sadly. The skin on the powerful body is smooth for the most part, but there are some large wrinkles on the flippers and around the neck and shoulder region. The dorsal fin is small compared to other ichthyosaur toys, but there have been a number of paleoartistic depictions of Temnodontosaurus with such a reduced fin. Oddly, there is a large ring of scales surrounding each orbit. Perhaps the sculptor looked at a fossil skull of Temnodontosaurus and mistook the prominent sclerotic rings for external features as opposed to internal support for the eyes. It is also possible that this is a bit of artistic license, or maybe even a nod to 19th century paleoart such as Duria Antiquior. Incidentally, it is worth mentioning that Temnodontosaurus possessed the largest eyes of any known vertebrate!


And now for the most interesting part. We know from fossil evidence that ichthyosaurs, despite being reptiles, were viviparous. To that end, this Temnodontosaurus is a new mother caught in the act of giving birth to a tiny little baby! The baby is emerging tail first, just like a whale calf, and is a perfect miniature replica of its parent. Only the head remains still inside the birth canal. And no, the baby is not removeable.


I think that 2015 was CollectA’s best year yet, and this birthing Temnodontosaurus is one reason why. The adult by itself is a fine toy with a unique appearance and good sculpting. And birth is a wondrous and beautiful part of nature, one that is rarely depicted in the world of plastic animal replicas, so props to CollectA for having the courage to do so.


Well, my friends, I’m happily wrapping up this year with my 75th review! Hope you’re still enjoying them. Here’s to 2016!