[Chinasaurs reborn 16] Prehistoric Passions' 3D printed models 2018 NEW

[acro-man]

[Chinasaurs reborn] is a series of Chinasaurs sharing threads that aims to bridge this lovable forum and Chinese sculptors so that more Chinese models can be shared and enjoyed worldwide.





*********************************************************
The studio has been quiet for a while, but they never stopped making dinosaurs.
This is a new thread introducing their works in 2018.
Let's see what prehistoric lives they build with passion.
*********************************************************


Model No.7: Mapusaurus
Studio: Prehistoric Passions
Modeler: XXH
Scale and Size: 1/35 (33cmL)
                1/72 (16cmL)
Material: UV resin
Content: kit, with base, unpainted
Status: Available (at least 2 weeks of production is needed)
Price: $50 for 1/72
       $110 for 1/35











-------------------------------------------

Model No.8: Diplodocus 1/35
Studio: Prehistoric Passions
Modeler: XXH
Scale and Size: 1/35 (70cmL)
Material: UV resin
Content: kit, with base, unpainted
Status: Pre-order
Estimated time of shipment: June, 2018
Price: $230
Slightly differs from its 1/72 version, this one has more resemblance with BBC Walking with Dinosaurs Diplodocus.
It is cast from a 3D printed prototype, not printed.









------------------------------------------

Please PM for purchase inquiries.
Thank you for reading

------------------------------------------

Guide to their previous works:
   [Chinasaurs reborn 10] Prehistoric Passions' 3D printed models 2017
      Model No.1: Pentaceratops
      Model No.2: Allosaurus
      Model No.3: Chasmosaurus
      Model No.4: Othnielia Pair
      Model No.5: Diplodocus 1/72
      Model No.6: Centrosaurus
Link: http://dinotoyblog.com/forum/index.php?topic=6113.0

[acro-man]

A short preview of their next releases: Gorgosaurus & Pachyrhinosaurus

[Patrx]

They look nice! Except, there's those blasted tarsal scutes again.

[Brolyss4]

That's the final pose for the pachyrhinosaurus? Not walking or running?

[PhilSauria]

That Diploducus a few posts up looks magnificent, if potentialy quite fragile in the real world! Bit out of my price range unfortunately.

[acro-man]

They look nice! Except, there's those blasted tarsal scutes again.

So they shouldn't have them?
Sorry I am no expert in dinosaurs.

That's the final pose for the pachyrhinosaurus? Not walking or running?

Not final design.

That Diploducus a few posts up looks magnificent, if potentialy quite fragile in the real world! Bit out of my price range unfortunately.

My exact feelings too....

[Patrx]

They look nice! Except, there's those blasted tarsal scutes again.

So they shouldn't have them?

Apparently not! You're Doing It Wrong: Dino Foot Scales|DinoGoss

[acro-man]

May 27th UPDATE: Argentinosaurus WIP

[ITdactyl]

OH wow... give me a minute to pick my jaw up from the floor... 'k, thanks.

I want one... but given the possible challenges of shipping that to Manila - I'll probably just keep it in my wishlist and drool here.  That is one magnificent beastie.

[tyrantqueen]

Gimme gimme

[acro-man]

June 13 UPDATE: Prehistoric Passions finally have a logo!



Designed by An.thony

[Rodrigo Clemente]

Why Dont then make a prototype in a 3D printer with the best resolution possible and then recast the models in resin to reduce the price? I am here imagining the price that Argentinosaurus will reach. 

[acro-man]

Why Dont then make a prototype in a 3D printer with the best resolution possible and then recast the models in resin to reduce the price? I am here imagining the price that Argentinosaurus will reach. 

For very big ones, yes, they made them in resin, such as the Diplodocus.
Even so, the price won't be cheap. The cost of raw resin has gone up one time compared to last year.

For the small ones, no, resin is alomost as much as 3D print.

[Bombyx]

Acro-man, could you please let us know the size of the argentinosaurus?
I don't collect 1/35 but for such big dinosaurs I think I have no choice than to purchase them in this small scale.

[Andreioli]

I just found this on the MonsterHouseHK website:
http://www.monsterhousehk.com/products.asp?id=1600
A Prehistoric Passions finished Allosaurus model available for pre-order.
The lower jaw seems posable.

[acro-man]

Acro-man, could you please let us know the size of the argentinosaurus?
I don't collect 1/35 but for such big dinosaurs I think I have no choice than to purchase them in this small scale.

Hi, Bombyx.
It's bound to be BIG, but you can commission a customized scale, taking advantage of 3D print.

However, the situation is - their new products are suspended indefinitely.
Maybe it's time to find a new target.

[acro-man]

I just found this on the MonsterHouseHK website:
http://www.monsterhousehk.com/products.asp?id=1600
A Prehistoric Passions finished Allosaurus model available for pre-order.
The lower jaw seems posable.

Yes, this is their first "TPR plastic" (soft, used by Vitae too) product, directly modified from this one:
http://dinotoyblog.com/forum/index.php?topic=6113.0
(3D print series No.2)
The magnet in its feet makes it stand very firm, even upside down.

[Brolyss4]

Any news regarding Pachyrhinosaurus or new models?

[Dinoreplicas]

Some nice detailing on these.

[acro-man]

@Brolyss4
Not at all.

The modeler is fully engaged in graduation thesis...

He is also making a T-rex as part of a funded plan.

Other models have to be put behind.