Recent Acquisitions

[SidB]

Excellent choice of an acquisition, @Ajax88. It's my top hadrosaur too, of all of the influx of them over the past several years.

[Concavenator]

@Ajax88 Wonderful acquisition. I echo S @SidB 's words. You just got yourself what is probably the best hadrosaur figure ever made.

[Monkeysaurus]

My 1/35 scale collection continues to grow! Most recent are the Kronosaurus, Dunk, and helicoprion. This is how you know I have a problem. I've basically run out of room for more until I discovered ceiling hooks - they have enabled me to colonize the  brick wall so I started getting more marine life. Collecting finds a way!

[Turkeysaurus]

It's sad Dunk got shrink and not as big as used to be. One of the greatest PNSO nonetheless.

I hope they are hanged safely, there is a fortune on those walls and desk. 

[oscars_dinos]

My 1/35 scale collection continues to grow! Most recent are the Kronosaurus, Dunk, and helicoprion. This is how you know I have a problem. I've basically run out of room for more until I discovered ceiling hooks - they have enabled me to colonize the  brick wall so I started getting more marine life. Collecting finds a way!

What critter do you have in the tank

[Monkeysaurus]

It's sad Dunk got shrink and not as big as used to be. One of the greatest PNSO nonetheless.

I hope they are hanged safely, there is a fortune on those walls and desk. 

I know! I've recently read that the Dunk got an insane downsizing! The only reason it's still with the 1:35 club is that we aren't 100% certain of its actual size. It probably didn't get that big but there's still a reasonable chance it did.

As far as any of them falling - the blue whale has a two redundancy hooks for safety. They're also hanging from the most secure ceiling anchors I could get. The Megalodon and Blue Whale are the only two that would be a real problem if they fell and I'm confident they won't. The rest are light enough to not worry me too much

[Monkeysaurus]

@oscars_dinos

Tailless Whip Scorpion and the smaller one to the right is a southern black widow. I love "creepy crawlies"

[Roselaar]

Added more JW figures to the ever growing collection:

[Faelrin]

I adore that Gigantspinosaurus, in part from the colors, and I think the sculpt is of one of their better stegosaurs.

[Sim]

I've acquired the Papo Suchomimus.  I like it a lot, though if I could change one thing about it, it would be to make the head and neck be facing less to the side than what the figure has.  It's a unique pose though, and I still love the figure.

I've also decided to keep my Eikoh Titanis as it's around 1:35 scale by my calculations.

[crazy8wizard]

I've acquired the Papo Suchomimus.  I like it a lot, though if I could change one thing about it, it would be to make the head and neck be facing less to the side than what the figure has.

you might be able to gradually ease the neck into a straighter position with a hair dryer or very hot water. I know Papo makes their figures out of a more rigid plastic so it might not work as well as a Safari figure, but it might be worth a shot.

[Sim]

Thanks, but it's okay, I'm happy with the figure as it is.  The degree to which the neck is turned just makes it hard to view the figure as in a neutral pose, but it does create interest with the angles the figure is at!

[AcryAllo]

I dunno about y'all but I feel the PNSO Sucho is the definitive model of the genus...

[Rayeknor]

Not a dinosaur, but it will go with the 1:35 dino gang if I can figure out how to display it in the limited real estate available, which will be a problem now with the Haolonggood argentinosaurus especially taking up a similar amount of real estate.

I had my eye on the PNSO and Kaiyodo 1:35 blue whales to go with the sauropods for a while, but when I had a shot to get one of the limited edition models by Sumeru studio I decided to jump on it. It is similar in size to the PNSO model, at about 92cm along the centra adding up to a ~32m individual. Sorry for the rushed photos with indoor lighting, it does not do the model any justice. Cameos by 1:35 African elephant and dude.

[ceratopsian]

That is so elegant!

[AcryAllo]

Ngl if PNSO ever create an icythyotitan, I'm instabuying it

[AcryAllo]

Not a dinosaur, but it will go with the 1:35 dino gang if I can figure out how to display it in the limited real estate available, which will be a problem now with the Haolonggood argentinosaurus especially taking up a similar amount of real estate.

I had my eye on the PNSO and Kaiyodo 1:35 blue whales to go with the sauropods for a while, but when I had a shot to get one of the limited edition models by Sumeru studio I decided to jump on it. It is similar in size to the PNSO model, at about 92cm along the centra adding up to a ~32m individual. Sorry for the rushed photos with indoor lighting, it does not do the model any justice. Cameos by 1:35 African elephant and dude.

An icthyotitan would go so well with them... hope PNSO makes one

[Turkeysaurus]

Invicta Brachiosaurus, Triceratops & Iguanodon. eBay full of them but I can't order from abroad because of new custom regulations so finding these from a seller in my country was almost impossible.

I already had Tyrannosaurus, Apatosaurus, another Triceratops, Megalosaurus, Plesiosaur.

[SenSx]

Wow insane Blue Whale.
You are also talking about PNSO making one in 1/35 ?
I wasn't aware of that.

I would love an Ichthyotitan.

[crazy8wizard]

A 1:35 scale Ichthyotitan figure figure might actually be as long as the fossils we have of it lol. It would be terrifyingly enormous (just like the real deal).